DALI PHANTOM IKON IN-WALL SPEAKER

Code: IKON OW/W

The famous and award-winning IKON sound in your walls. The IKON PHANTOM In-wall has all the features of the IKON series and enables you to build the IKON sound into your wall.

Enclosed in a rigid but vibration damping aluminium cabinet, the IKON PHANTOM fires clear, crisp sound. Be it in stereo for your favorite music or in surround for the movies you love.

Aluminium cabinet
A rigid, die cast aluminium cabinet has been used for the IKON Phantom. This will ensure identical working conditions for the 6.5” bass/midrange driver no matter which wall cavity the speaker is mounted in. Inside the cabinet is used a bituminous material to make it inert to resonances. Ribs in the die cast aluminium and the coupling to the MDF baffle will also prevent build-up of resonances.

By using the cabinet, it is possible to use a bass/midrange driver with soft, low loss rubber surround and a spider causing a low resonance frequency for the driver. This would not have been possible without the rear cabinet, because the surround and spider thus would have to be less soft to be able to control the movement of the bass/midrange driver with compromised performance as consequence.

Because of the small form factor of the speaker it is very difficult for standing waves to build-up. Combined with strategically positioned materials inside the cabinet, standing waves are reduced to an absolute minimum.

Amplifier Friendly 
The amplifier to loudspeaker interface is influenced by the impedance characteristics of the speaker. Loudspeakers with poor impedance characteristics can force amplifiers (stress the amplifier unnecessarily) to perform badly. A stressed amplifier will typically add more distortion to the music.

The IKON Phantom drivers are optimised so that the impedance loads of the loudspeakers are very close to a pure resistive load, minimizing amplifier stress (a flat frequency response above the resonance frequency of the woofer).

In StockGET A QUOTE

Description

HYBRID TWEETER MODULE

DALI’s trademark, the hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.

WOOD FIBRE CONES

This mix paper pulp and wood fibre makes the cones stiff and light which ensures that every micro detail in the signal is reproduced unfiltered.

EASY INSTALLATION

The dogleg mounting system makes the install process an easy one-step action simply by tightning the dedicated screws to swing out the dogleg brackets.

TRADITIONAL SPEAKER TECHNOLOGIES

The PHANTOM High-end speakers are in-stall speakers packed with traditional speaker virtues. Not only do the PHANTOM High-end speakers consist of wood fiber cones and drivers mounted in a classic MDF baffle, the placement of the woofer and tweeter is just similar to our traditional speakers.

  • Available in white
Product series PHANTOM
Frequency Range (+/-3 dB) [Hz] 64 – 30,000
Sensitivity (2,83 V/1 m) [dB] 88.0
Nominal Impedance [ohms] 8
Maximum SPL [dB] 106
Recommended Amplifier Power [W] 25 – 150
Crossover Frequency [Hz] 3,000 / 14,000
Hybrid tweeter module, Super high freq. driver, Quantity 1 x 17 x 45 mm
Hybrid tweeter module, Super high freq. driver, Diaphragm type Ribbon
Hybrid tweeter module, High frequency driver, Quantity 1 x 28 mm
Hybrid tweeter module, High frequency driver Diaphragm type Soft Textile Dome
Low frequency driver, Quantity 1 x 6½”
Low frequency driver, Diaphragm type Wood Fibre Cone
Enclosure type Closed Box
Connection Input Single Wire
Magnetic Shielding No
Recommended Placement In-Wall
In-Ceiling
Dimensions (HxWxD) [mm] 436 x 274 x 113
Cut-Out Dimensions (HxWxD) [mm] 400 x 237 x 96
Weight [kg] 5.7
Accessories Included 3mm Allen Key
Assembly Tools
Installation Templates
Logo Badge
Manual
Painting Cover Mask

Reviews

There are no reviews yet.

Be the first to review “DALI PHANTOM IKON IN-WALL SPEAKER”

Your email address will not be published. Required fields are marked *